Charge Controllers
Morningstar TriStar
Morningstar TriStar 45
A 45 amp controller for 12, 24, or 48V systems. Also can be used as a diversion controller or load control (up to 300 amps inrush current). Shown with optional digital meter.
Morningstar TriStar 60
A 60 amp controller for 12, 24, or 48V systems. Can also be used as a diversion controller or load control (up to 300 amps inrush current). Shown with optional digital meter.
Sunsaver
Sunsaver: The world's leading small solar controller for both professional and consumer applications.
This controller is approved for use in hazardous locations - Class 1, Division 2, Groups A, B, C, D. Featyres: Series deisgn (not shunt), no need to derate, fully encapsulated in epoxy potting, ability to parallel for 40 amps or more.
ProStar
ProStar 15 and 30 Charge Controllers with Meter
The ProStar 15 features "intelligent" charge controlling that will significantly improve battery life and performance. Settings for sealed or flooded batteries, low voltage disconnect, temperature compensation and PWM (pulse width modulation) battery charging. LCD display shows battery voltage, solar amps and load amps. For 12V or 24V systems, rated PV current 15 amps, rated load current 15 amps.
SunKeeper Solar Controller
SunKeeper Solar Controller
Rated for 6 amp or 12 amp at 12VDC, provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications:
- Epoxy encapsulated and rated for outdoor use
- Designed using extremely efficient power electronics and is rated to 70°C
- Certified for use in Class 1, Division 2 hazardous locations, making it an ideal controller for solar powered oil/gas applications.
SunGuard
SunGuard
The most advanced small, economical solar charge controller on the market today.
- This technology provides:
- Exceptional Reliability
- PWM Battery Charging
- Consistent High Quality
- Low Cost
- Features:
- No need to derate
- Fully encapsulated in epoxy potting
- Self-consumption is 6 mA
- Temperature compensation
- ISO 9002 quality programs
Xantrex Controllers
Xantrex Controllers
A Controller for Virtually Any DC Charging Source
The C Series, including the C35, C40 and C60, is the benchmark of our charge controller lineup. The C35 and C60 are field configurable for 12 and 24 VDC operation. The C40 may be configured for 12, 24, or 48 VDC operation. All can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED.
OutBack MX60
OutBack MX60
The OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance.
Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 vdc with PV open circuit voltage as high as 125 vdc. The MX60's setpoints are fully adjustable to allow use with virtually any battery type, chemistry and charging profile.
The OutBack MX60 allows you to use a higher output voltage PV array with a lower voltage battery - such as charging a 24 vdc battery with a 48 vdc PV array. This reduces wire size and power loss from the PV array to the battery/inverter location and can maximize the performance of your PV system.
The OutBack MX60 comes standard with an easy to use and understand display of the PV system’s performance. The four line, 80 character, backlit LCD display is also used for programming and monitoring of the system’s operation.
The OutBack MX60 can also be connected to the OutBack MATE system controller and display to allow monitoring of up to eight MX60 controllers from a distant location - up to 300 feet away. The MATE also includes an optoisolated RS232 port for connection to a PC computer for data logging and system monitoring.
All of the equipment required to complete your package is available as well. The above is only a sample of the main products that we carry. Discounts given on volume and packages.